Caution: Waste ink is classified as industrial waste. Dispose of waste ink according to your local laws
and regulations such as entrusting it to an industrial waste disposal company. When handing over the
waste ink to the industrial waste disposal company, make sure you include the Safety Data Sheet (SDS)
found on Epson's support website.
Parent topic: Maintenance
Related tasks
Removing Media
Performing Head Maintenance
Cleaning the Product
Clean your product periodically, and if you notice it is dirty on the inside or outside.
Caution: If dust or other particles remain on the platen inside the product, the print head nozzles may
clog or the print head may be damaged.
1. Remove any paper from the product.
2. Turn off the product and disconnect the power cable from the electrical outlet.
3. Use a soft, clean cloth to carefully remove any dust or dirt from the exterior of the product.
4. To remove stubborn dirt, dampen the cloth with mild detergent, wipe the surface, and wipe it dry with
a clean dry cloth.
Caution: Do not use a hard brush, benzene, alcohol, or paint thinner to clean the product or you
may damage it.
49
To Next Page
Loading...
