Related tasks
Checking for Clogged Print Head Nozzles
Cleaning the Print Head
Media Does Not Feed or Eject Correctly
If media does not feed straight or eject from the product correctly, try these solutions:
• Make sure the media is loaded correctly, and is not creased, folded, or jammed in the product.
• Make sure your media is not too thick or thin, and the paper settings match the media. Check the
media specifications and your RIP software documentation.
• If you continue to have problems ejecting certain media, check that the Paper Suction setting on the
product control panel is not too strong.
Parent topic: Solving Printing Problems
Related references
Paper Menu Settings
Paper Specifications
Related tasks
Loading Media
Media Does Not Cut Cleanly
If the built-in cutter does not cleanly cut your media, replace the cutter.
Parent topic: Solving Printing Problems
Related tasks
Cutting Media
Replacing the Cutter
Solving Print Quality Problems
Check these sections if you have problems with print quality.
Nozzle Check Pattern Prints Incorrectly
Overall Print Quality Is Poor
Printed Media is Stained or Marred
Image is not Positioned Correctly on the Media
Parent topic: Solving Problems
91
To Next Page
Loading...
