Setting Options Description
Advanced Settings Roll Paper Tension If paper wrinkles, select High or Extra High
(applies only if no custom roll paper tension is
set).
Less Head Scuffing Prevents scuffing when printing on thick paper.
This temporarily changes the Platen Gap
setting, unless it is already set to Wider.
Drying Time Per Page If ink blurs on the paper, set a time from 0.1 to
60 minutes.
Paper Size Check Automatically detects the edges of the paper.
Turn off this setting only if the printer displays
a paper setting error when media is loaded
correctly. Changed settings take effect when
paper is reloaded.
Paper Skew Check Stops printing when skewed paper is detected.
Leave this setting On to avoid paper jams.
Print Nozzle Pattern Selects how often to print an automatic nozzle
check pattern (from 1 to 10 pages).
Periodical Cleaning Selects the strength (Light, Medium, or
Heavy) and frequency of automatic head
cleaning cycles. Even when Off , the printer
automatically cleans the print head at set
intervals to prevent clogging.
Cleaning Cycle Selects the frequency of automatic head
cleaning cycles (OFF or from 1 to 10 pages).
Restore Settings — Returns all printer settings to their default
values.
Printer Status Settings
Setting Options Description
Firmware Version xxxxxxx,x.xx,xxxx Displays the printer's firmware version.
Option Status — No options available.
Show total prints — Shows total media printed in feet
2
or m
2
.
45
To Next Page
Loading...
