113
Options Description
Platen Gap Adjusts the gap between the media and the print head.
Standard: select for most media.
Wide or Wider: select if printouts are smeared.
Thickness Pattern When creating a custom paper configuration, lets you print
patterns to determine the thickness of the custom paper:
Select the pattern number with the least misalignment.
Paper Feed Adjust A Lets you adjust the paper feed if you are unable to resolve
banding issues even after head cleaning and alignment.
Pattern: prints an adjustment pattern that you can use to
adjust the paper feed by selecting the lightest-colored
pattern in each row:
Value: lets you choose an adjustment between –0.70 and
+0.70%. Select a higher value to reduce dark bands or a
lower value to reduce white bands.
Paper Feed Adjust B Lets you choose an adjustment between –0.70 and
+0.70% for the bottom area of cut sheets.
To Next Page
Loading...
