24
2. Slide the spacer all the way onto the spindle until it reaches the gray paper stop on the other end.
Make sure the holes in the spacer and paper stop line up exactly.
Parent topic: Roll Paper Handling
Related references
Borderless Paper Type Compatibility
Loading Roll Paper
You can load roll paper with a 2- or 3-inch core and a width of up to 17 inches (43 cm).
1. Make sure the printer is turned on.
2. On the control panel, press the paper source button.
3. Press the down arrow button to select Roll Paper/Cut or Roll Paper/No Cut, and press the OK
button.
4. Open the roll paper cover.
To Next Page
Loading...
