31
4. Remove the black paper stop from the spindle as shown.
5. Remove the roll paper from the spindle.
6. Place the roll paper in its original package.
Note: Store roll paper on its end or horizontally (if the packaging end-caps are installed). Never store
roll paper on its edge, as a flat spot can develop and lead to imaging artifacts on the prints.
Note: Do not store roll paper in dusty areas. Print head maintenance and cleanings increase if dust
accumulates on the paper.
7. Close the roll paper cover.
Note: To prevent dust from accumulating inside the printer, always keep the roll paper cover closed
unless you are loading or unloading media.
Parent topic: Roll Paper Handling
Cut Sheet Handling
You can load a variety of types and sizes of cut sheet paper in your product.
To Next Page
Loading...
