21
2. Align the triangles on the gray adapter with the triangles on the paper stop and press until the hooks
click into place.
3. Insert the other gray adapter onto the spindle and attach it to the other paper stop.
Parent topic: Roll Paper Handling
Loading Roll Paper on the Spindle
Load roll canvas media on the spindle included with the roll paper unit.
1. Remove any tape and protective paper from the end of the roll. Make sure the paper is cut straight
across to avoid paper feeding problems.
Note: Avoid touching the surface of your paper or resting it on a dusty area. With canvas media that
you have previously loaded, it’s a good idea to cut the edge straight each time you reload it.
To Next Page
Loading...
