Epson SureColor P5370 - Page 138

138
Setting Options Description
Advanced Paper Settings Various options See the Advanced Paper Settings table
below.
Remaining Amount
Management
Remaining Amount
Management
Select On to display and record the amount of
remaining roll paper.
Remaining Amount Select the amount of roll paper remaining.
Remaining Alert Select the amount of remaining roll paper
before a warning is displayed.
Change Paper Type or
Change Paper Type/Paper
Width
Paper Type Select a paper category and paper type.
Paper Width Change the paper width by setting Paper Size
Check to Off.
Select the width of the loaded paper, or select
User-Defined if the width is not listed.
Advanced Paper Settings menu (in the Roll Paper menu)
Setting Options Description
Paper Thickness 0.01 to 1.50 mm or
0.4 to 59.1 mil
Select the thickness of the roll paper;
displayed only when using a custom paper
type.
Note: Load paper that is 0.003 to 0.02 inch
(0.08 to 0.50 mm) thick and set the paper
thickness accordingly.
Platen Gap Auto
0.9
1.2
1.5
2.1
2.6
Select the distance between the print head
and the paper; displayed only when using a
custom paper type.