139
Setting Options Description
Top Margin 3 mm
15 mm
20 mm
35 mm
Select the margin for the leading edge of the
printed image.
Depending on the paper type and printing
environment, colors may be uneven near the
leading edge if the margin is small.
Bottom Margin 3 mm
15 mm
Select the margin for the trailing edge of the
printed image.
Paper Suction –4 to +4 Select to adjust the printer's suction setting;
choose lower values for thinner papers.
Back Tension Standard
High
Extra High
Select to adjust the paper feeding tension;
choose High or Extra High if paper wrinkles
during printing.
Drying Time Drying Time per Pass
Drying Time per Page
Set the amount of time the printer pauses to
allow drying after each pass or each printed
page.
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded.
Select Off when the paper roll is empty. This
allows you to set the paper width before
feeding the paper.
Auto Cut Follow Paper Source
Settings
Never Cut
Select Follow Paper Source Settings to
follow the cut settings in Printer Settings >
Paper Source Settings > Roll Paper Setup
> Cut Settings.
Select Never Cut to cut paper manually.
Skew Reduction On
Off
Select Off if the front edge of thin or softer
paper folds.
Roll Core Diameter 2inch
3inch
Select the paper core size for the loaded roll
paper.
To Next Page
Loading...
