Epson T3 Series User Manual

Safety and Installation (T, VT / EPSON RC+ 7.0) Rev.15 ix
VT series Manipulator system are configured by a combination of the following
software.
Controller Firmware
VT6-A901S, VT6-A901C, VT6-A901P
Ver.7.4.56.2 or later
VT6-A901S-DC
Ver.7.4.57.1 or later
EPSON RC+ 7.0
Before Ver.7.4.6 !!!
Ver.7.4.7 or later OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are
available.
!!!: Compatible Connection is OK. It is recommended to use the following
versions or later. Display or control may not be operated
properly.
EPSON RC+ 7.0 Ver.7.4.7

Epson T3 Series Specifications

General

Brand	Epson
Model	T3 Series
Category	Robotics
Language	English