Safety and Installation (T, VT / EPSON RC+ 7.0) Rev.15 vii
Before Reading This Manual
"T" and "T series" described in this manual are the following models.
T3 series
T6 series
"VT" and "VT series" described in this manual are the following model.
VT6 series
T series and VT series Manipulators can use the Teach Pendant (TP2, TP3).
Do not connect the other devices to TP port except TP2 and TP3. Connecting
other devices may result in malfunction of the device since the pin
assignments are different.
Concerning the security support for the network connection:
The network connecting function (Ethernet) on our products assumes the use
in the local network such as the factory LAN network. Do not connect to the
external network such as Internet.
In addition, please take security measure such as for the virus from the
network connection by installing the antivirus software.
Security support for the USB memory:
Make sure the USB memory is not infected with virus when connecting to the
Controller.
To Next Page
Loading...
Need help?
General
