Epson TM-290-II User Manual

Default •
as if they were set in Standard Mode.
May be shifted by one half-dot from the set value in Page Mode.
The default tab positions are at intervals of 8 characters
(9th, 17th, 25th,…) for the 5X7 font.
Reference HT, 6-4 2. Restrictions in Page Mode
ESC F n
Description
Default
Reference
ESC J n
Name
Set/Cancel cut sheet reverse eject
Format
< 1B >
H
< 46 >
H
< n >
Range
Sets or cancels the cut sheet reverse eject when the sheet
ejection is executed using FF.
• Only the lowest bit of n is valid.
When n =
<* * * * * * *1>B, reverse eject is set.
When n = <* * * * * * *0>B, reverse eject is canceled.
(And the forward ejection is set.)
n 0
=
FF
Name
Print and feed paper using minimum units
Format
< 1B >
H
< 4A >
H
< n >
Range
Description Prints the data in the print buffer and feeds the paper n/60
inches.
• Sets the print starting position to the beginning of the line.
• The predetermined line spacing remains unchanged.
Default • Not defined.
ESC K n
Name
Print and reverse feed using minimum units
Format < 1B >
H
< 4B >
H
< n >
Range
Description Prints the data in the print buffer and feeds the paper n/60
-29-

Epson TM-290-II Specifications

General

Brand	Epson
Model	TM-290-II
Category	Printer
Language	English