Epson TM-290-II - Page 39

Notes
• If the panel switches are disabled by this command, all
the panel switches are affected. The functions executed
using the panel switches, e.g., paper feeding, are disabled.
Default n = 0
ESC d n
Name Print and feed paper n lines
Format
< 1B >
H
< 64 >
H
< n >
Range
Description
Prints the data in the print buffer and performs n line feeds.
• Sets the print starting position to the beginning of the line.
• The predetermined line spacing remains unchanged.
Default Not defined.
ESC e n
Name Print and reverse feed n lines
Format
< 1B >
H
< 65 >
H
< n >
Range
Description
Prints the data in the print buffer and performs n line feeds
in the reverse derection.
• Sets the print starting position to the beginning of the line.
• The predetermined line spacing remains unchanged.
Notes • Valid only in Standard Mode
Default Not defined.
ESC f m n
Name Set cut sheet waiting time
Format
< 1B >
H
< 66 >
H
< m >< n >
Range m = 0
Description Sets the time the printer waits for a cut sheet to be loaded,
and the time from when the cut sheet is loaded to when
the printer starts operation.
• The waiting time is unlimited.
-34-