Epson TM-290-II - Page 43

Notes
Default
Example
When n =
<* * * * * * * 1>B,
upside-down character
printing is set.
When n =
<* * * * * * *0>B, upside-down character
printing is canceled.
• The upside-down character is specified as rotation of all
the normal characters on the line by 180°.
The upside-down characters are printed in the opposit
direction from normal characters.
• Valid only when input at the beginning of a line.
• Valid only in Standard Mode.
n 0
=
When upside-down
When upside-down
character printing is canceled. character printing is set.
Paper feed direction
n n Ignored Commands
The TM-290 II ignores the following command:
ESC c3 n
-38-