Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
MICR (EPSON TM Series)
3
E EPSON TM-H6000IVE MICR TM-H6000IVE
S EPSON TM-H6000V MICR TM-H6000V
P EPSON TM-H6000VP MICR TM-H6000VP
U EPSON TM-H6000VU MICR TM-H6000VU
E EPSON TM-H6000VE MICR TM-H6000VE
TM-H6000V
B EPSON TM-H6000VB MICR TM-H6000VB
I/F indicate the connected interface.
The following is the list of the four connecting interfaces.
S: Serial
P: Parallel
U: USB
E: Ethernet
B: Bluetooth
2.2 References of Firmware Versions
Refer to the release notes (Relnote.txt).
2.3 Settings of DIP Switches and Hardware
There are no Dip Switch settings for the MICR. Refer to the manual of currently
used Printer for settings of the Printer.
2.4 Setting of Devices
The SetupPOS utility should be used for setting devices. Regarding how to use
the SetupPOS utility, please refer to the "EPSON OPOS ADK MANUAL User's
Manual (Installer/ SetupPOS/ TMUSB)".
1) Setting of Parallel interface devices
When the SetupPOS utility is used to select the device when using a Parallel port,
select devices with “P” appended to the end of the device name.
Example: TM-H6000IIIP
To Next Page
Loading...
Need help?
General