Epson TM-H5000II series

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H5000II/TM-U590)
12
3.1.3 Width and Height Properties
The width and height properties are described below.
Settings
Property
Default
Value
Maximum
value [dot]
Minimum
value [dot]
RecLineSpacing 30 127 24
*2
JrnLineSpacing X X X
SlpLineSpacing 12 127 0
SlpLineHeight [dot] 9
RecLineHeight [dot]
*1
24,17
JrnLineHeight [dot] X
SlpLineWidth [dot] 400
RecLineWidth [dot] 512
JrnLineWidth [dot] X
RecSidewaysMaxLines
*1
17
*4
RecSidewaysMaxChars
*1
(When Font A is selected)
69
*5
RecSidewaysMaxChars
*1
(When Font B is selected)
92
*5
RecLinesToPaperCut
*1
5
*3
SlpSidewaysMaxLines 33
*4
SlpSidewaysMaxChars 150
*5
SlpMaxLines 0
X: No settings
*1
Available only for the TM-H5000II. On the other models, there is no setting.
*2
In the case of a line thermal station, the Line Spacing setting is identical with the
height of the characters which means that it can be set at up to 17 when Font B is
selected.
*3
It can be changed by the settings of the RecLineSpacing or the character height.
*4
It can be changed by the settings of the XxxLineSpacing or the XxxLineHeight.
*5
It can be changed by the settings of the font width. (TM-H5000II)
When the RecLineSpacing is 0, the RecLinesToPaperCut is –1.
When the SlpLineSpacing is 0, the SlpSidewaysMaxLines is –1.