Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H5000II/TM-U590)
6
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Baud rate [bps] 2400, 4800, 9600, 19200, 38400
Bit length [bit] 8
Parity NONE, ODD, EVEN
Stop bit [bit] 1
Handshake DTR/DSR
Output buffer length [byte] 32 to 1024
Output interval time [ms] 0 to 9999
The default settings are as shown in the following table.
Item Setting range
Baud rate [bps] 9600
Bit length [bit] 8
Parity NONE
Stop bit [bit] 1
Handshake DTR/DSR
Output buffer length [byte] 1024
Output interval time [ms] 2500
To Next Page
Loading...
