Epson TM-H5000II series

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H5000II/TM-U590)
iii
Contents
SECTION 1. INTRODUCTION.......................................................................................1
SECTION 2. DETAILS ON SETTINGS..........................................................................2
2.1 References of Firmware Versions ............................................................................2
2.2 Settings of DIP Switches .......................................................................................... 2
2.3 Port Information ....................................................................................................... 6
2.4 Device
Settings .........................................................................................................8
2.4.1 Usable Device Specific Settings......................................................................... 8
SECTION 3. FUNCTION DETAILS ...............................................................................9
3.1 Property Set Values and Default Values.................................................................9
3.1.1 Capability Set Values.........................................................................................9
3.1.2 List Properties..................................................................................................11
3.1.3 Width and Height Properties ..........................................................................12
3.1.4 Common Property Strings ............................................................................... 13
3.1.5 PageMode Print Properties.............................................................................. 14
3.2 Methods...................................................................................................................15
3.3 Escape Sequences ................................................................................................... 16
3.4 Printable Barcode Type .......................................................................................... 17
3.5 Power Condit
ion Reports........................................................................................ 17
3.6 Synchronous Processing ......................................................................................... 17
3.7 Printing Positions ...................................................................................................18
3.8 Electronic Logo Function (NVRAM) ...................................................................... 18
3.9 Printable bitmap
types and sizes........................................................................... 19
3.10 Color Bitmap Printing .......................................................................................... 19
3.11 Maintenance Counter ........................................................................................... 19
3.12 Automatic Recovery Function .............................................................................. 20
3.13 Output without Flow Control on the USB/Ethernet Interfaces .........................20
3.14 LED Blinking when BeginInsertion is executed................................................. 20
SECTION 4. WARNINGS..............................................................................................21