Epson TM-H5000II series Development Guide

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H5000II/TM-U590)
15
3.2 Methods
The following explanation is about supported/unsupported Methods, and the
detailed information.
Method Supported/Unsupported Compatibility with the
PageMode printing
PrintNormal O O
PrintTwoNormal X X
PrintImmediate O O
*2
PrintBarCode O O
*3
PrintBitmap O O
*4
PrintMemoryBitmap O O
*4
CutPaper
*1
O
(1~100: Cutting with one point
of the bottom left corner uncut)
X
MarkFeed X X
ChangePrintSide X X
ValidateData O O
TransactionPrint O O
SetLogo O O
SetBitmap O O
RotatePrint O X
EndRemoval O O
BeginRemoval
*5
O O
EndInsertion O O
BeginInsertion O O
ClearPrintArea O O
PageModePrint O O
O :Supported
X :Unsupported
*1
Available only for the TM-H5000II. On the other models, there is no setting.
*2
If the specified Station is ready to print, the printing data shall not be stored in the
PageMode printing buffer but, instead, go straight to printing. If the Station is not ready
to print, an error is returned.
*3
If other than “LEFT” is specified for the printing position of barcode, the printing shall be
done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
*4
If other than “LEFT” is specified for the printing position of bitmap, the printing shall be
done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
*5
In the case of devices that only have a slip station, if BeginRemoval method is executed
when a paper is not placed in the slip station, OPOS_SUCCESS is returned.

Epson TM-H5000II series Specifications

General

Brand	Epson
Model	TM-H5000II series
Category	Printer
Language	English