132
Appendix
Environmental Conditions
Temperature
/ Humidity
Operating When using plain thermal paper
5 to 45 degrees C, 10 to 90% RH, non condensing
When using liner-free label paper
Temperature and humidity range guaranteed by the liner-free label paper.
Storage -10 to 50 degrees C, 10 to 90% RH (excluding paper)
Vibration
resistance
When packed Frequency: 5 to 55 Hz
Acceleration: Approx. 19.6 m/s
2
{2G}
Sweep: 10 minutes (half cycle)
Time: 1 hour
Orientation: x, y, and z
After being subjected the vibration, there should be no visual or operational problems
on the exterior or interior.
Shock
resistance
When packed Packing: Epson standard package specifications
Height: 60 cm {23.62"}
Orientation: 1 corner, 3 edges, and 6 surfaces
After being dropped, there should be no visual or operational problems on the exterior
or interior.
When
unpacked
Height: 5 cm {1.97"}
Orientation: Lift one edge and release it (for all 4 edges)
After being dropped while not operating, there should be no visual or operational
problems on the exterior or interior.
Noise Operating Approx. 52 dB (ANSI bystander position)
Note: The above noise value is based on Epson evaluation conditions.
Noise varies depending on the paper used, printing contents, and the setting values,
such as print speed or print density.
Waterproof
performance
Equivalent to IP22 (only when installed vertically)
Note: This is the result of an evaluation conducted by a third party evaluation
organization based on JISC0920 (IEC60529:2001), and does not guarantee
conformance to the standard, no damage, or no failure.
Altitude Approx. 3,000 m or less
Relative humidity
Operating
environment
range
90
60
80
10
20
40
0
0
10 20 30 40 50
Ambient temperature
[%RH]
34°C, 90%
40°C, 65%
45°C, 50%
[°C]
To Next Page
Loading...
Need help?
General
