78
Chapter 4 Advanced Usage
Advanced Usage
Software Settings
The printer has software setting functions such as memory switches and customized values that allow you to
configure various settings for the printer. See the next section for an overview of each feature. You can make/
change the settings using TM-L100 Utility, Epson TM Utlity, software setting mode of the printer, or ESC/POS
commands.
• For details on how to use TM-L100 Utility and TM Utility, please refer to the manual and help of the
respective software.
• For details on how to use the software setting mode, see
"Software Setting Mode (Customize Value
Settings)" on page 96
.
• For more information on ESC/POS commands, see
"ESC/POS" on page 111.
Methods
Settings
TM-L100 Utility/
Epson TM Utility
Software
Setting Mode
ESC/POS
Menu name in software
setting mode
Power ON notification
Memory Switches
✔
Handshaking (Condition for BUSY) ✔✔✔BUSY Condition
Data reception error ✔✔
Auto line feed ✔✔✔Auto Line Feed
Power saving function for USB ✔✔✔USB power-saving function
Roll paper end/near-end sensors ✔✔✔Output Paper-end Signals
Error signal output ✔✔✔Error Control
Network tethering ✔✔✔Network Tethering
Paper width ✔✔✔Paper Width with Paper Guide
User NV Memory
Customized Values
✔✔✔User NV Memory
NV Graphics Memory ✔✔✔NV Graphics Memory
Print density ✔✔✔Print Density
Print speed ✔✔✔Print Speed
Thai Character Composition ✔✔✔Thai Character Composition
Code-page ✔✔✔Default Character Code Page
International character set ✔✔✔Default International Character Set
Interface Selection ✔✔✔Interface Selection
Number of columns ✔✔✔Column Emulation
Command execution during offline ✔✔✔Command Execution (Offline)
Amount of top margin by backfeed ✔✔✔Top Margin