Epson TM-L100 Technical Reference Guide

32
Chapter 2 Setup
Changing the Paper Width
The printer allows you to use three widths roll paper.
The factory default setting is to use 58 mm width roll paper.
• You cannot change the paper width to a wider paper width after you have used the printer.
Because parts of the print head that had not touched paper may be damaged by being rubbed
against the platen roller, and the autocutter may have worn out.
• If you must change to a roll paper wider than the paper width in use, the software settings may
need to be changed. For more details, see "Software Settings" on page 78
.
No roll paper guide Attach 58-mm width roll paper
guide to the right
Attach 40-mm width roll paper
guide to the left
Attach 58-mm width roll paper
guide to the right
(Default)
80 mm80 mm
58 mm58 mm
58 mm58 mm
80 mm80 mm
40 mm40 mm
40 mm40 mm
80 mm
58 mm
58 mm
80 mm
40 mm
40 mm

Epson TM-L100 Specifications

General

Brand	Epson
Model	TM-L100
Category	Label Maker
Language	English