68
Chapter 3 Handling
4
Install the roll paper in the correct direction.
Make sure that the roll paper is not slack. If the roll paper is slack, take up the slack before installing it.
• Before installing the roll paper, make sure that the roll paper is not deformed. Using a deformed
roll paper will cause the printer to malfunction.
• Before installing the roll paper, take up any slack in the roll paper by pulling its leading edge. If
you install a slack roll paper, a paper jam or print quality problems may occur.
• If the roll paper is replaced while the printer is turned off and a roll paper end occurs, turn the
printer on and then replace the roll paper.
To Next Page
Loading...
