105
Chapter 5 Handling
Attaching the Printer Covers
Depending on attachment positions of the rear and bottom covers, paper eject direction changes. Decide from
which way to eject paper according to the installation location of the printer.
Follow the steps below to attach the printer covers.
For Ejecting Paper Upward
1
Align the catches and attach the bottom cover to the printer.
2
Hook the catches into the bottom cover and attach the rear cover to the printer.
When you pass power or interface cables through the left, right, or bottom of the printer, the cable
slot cover will help keep the back of the printer flat and neat looking. See "Routing Cables in Various
Dir
ections" on page 62 for instructions on how to install the
cable slot cover and route the cables.
To Next Page
Loading...
