77
Chapter 3 Advanced Usage
Setting/Check Modes
As well as print mode, the following modes are also provided for making various printer settings and checking
items.
• Self-test mode
• NV graphics information print mode
• Receipt Enhancement information print mode
• Software settings mode
• Restore default values mode
• Interface setup mode
• TM-Intelligent settings information print mode
• Peripheral Device Information print mode
• Hexadecimal dumping mode
The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the
power is turned on.
NV graphic information print mode, Receipt Enhancement information print mode, Software settings mode,
and Restore default settings mode are selected depending on the Feed button operation performed during a
self-test.
Close the roll paper cover, and turn on the printer while pressing the Feed button.
Self-test
Briey press the Feed button. Hold down the Feed button.
Open the roll paper cover, and turn on the printer while pressing the Feed
button, and then close the roll paper cover.
Continuing the self-test
Mode selection guidance
Hexadecimal dumping
Press the Feed
button once briey
and then hold it
down.
NV Graphics
Information
Press the Feed
button twice briey
and then hold it
down.
Receipt
Enhancement
Information
Press the Feed button
three times briey
and then hold it
down.
Software Settings
Press the Feed
button four times
briey and then hold
it down.
Restore Default
Values
Press the Feed button
ve times briey and
then hold it down.
Interface Setup
Press the Feed
button six times
briey and then hold
it down.
TM-Intelligent
settings information
print
Press the Feed
button seven times
briey and then hold
it down.
Peripheral Device
Information print
To Next Page
Loading...
Need help?
General
