117
Appendix
*1: The cutting method can be changed by a command.
*2: According to our operation conditions. It may differ depending on the usage conditions and product model.
*3: Indicates the point at which the wear-out failure period starts.
*4: Indicates the mean time between failures during the random failure period.
*5: Indicates the overall mean time between failures, including wear-out and random failures, before the life is
reached.
Life
*3
Printer mechanism 17 million lines (printing + paper feeding)
Thermal head 150 km
Autocutter Partial cut: 2.2 million cuts
Full cut: 1.5 million cuts
Note:
If both partial cut and full cut are used, cut life varies from the
above depending on usage conditions.
MTBF
*4
360,000 hours
MCBF
*5
65 million lines
Temperature/Humidity Operating: 5 to 45°C {41 to 113°F}, 10 to 90% RH
Storage: -20 to 60°C {-4 to 140°F}, 10 to 90% RH
Overall dimensions (W × D × H) Ejecting paper upward: 127 X 127 X 130 mm (5.0 × 5.0 × 5.1")
Ejecting paper frontward: 127 X 128 X 129 mm (5.0 × 5.0 × 5.1")
Weight (mass) 1.3 kg {2.8 lb}
To Next Page
Loading...
Need help?
General
