Epson TM-m30III User Manual

38
Chapter 1 Product Overview
Support and Usage Precautions
When using the USB-PD function and network tethering function, confirm the following precautions and
make sure to fully check and evaluate the operation before use.
• Communication may not be possible even if the smart device is USB-PD compatible.
• Use the genuine cable of the smart device or a USB certified cable to connect the printer to the smart device.
Also, when using a Lightning cable, use an MFi certified cable.
• Charging may not be possible depending on the charging specifications of the smart device.
• Bluetooth communication cannot be used when an iOS device is connected to the printer via the USB-C
connector (USB-PD compatible) and the USB-PD mode is set to [Normal]. In this case, set the USB-PD
mode to [Source Fixed].
USB-PD Mode: Normal
USB-PD Mode: Source Fixed
• After turning on the printer, wait until the initialization process is complete (about 40 seconds) before
printing or making settings via the USB-C connector (USB-PD compatible).
• We are not liable for any pure economic loss caused by failure to charge your smart device due to failure,
error, or malfunction of the printer.
USB connection
USB communication
with an iOS device
Bluetooth communication
with an iOS device
Connected Possible Not possible
Not connected Not possible Possible
USB connection
USB communication
with an iOS device
Bluetooth communication
with an iOS device
Connected Not possible Possible
Not connected Not possible Possible

Epson TM-m30III Specifications

General

Type	POS printer
Print technology	Thermal
Maximum resolution	203 x 203 DPI
USB port	Yes
Serial interface	-
Connectivity technology	Wired & Wireless
Ethernet LAN	No
Internal memory	- MB
Product color	White
Mobile operating systems supported	Android, iOS