20
R/E (Receipt Enhancement)
Graphics, such as shop logos can be printed on top or bottom of receipts by setting R/E (Receipt
Enhancement). For information about R/E, see "Setting the Memory Switches/Receipt
Enhancement" on page 46.
User-defined Page
You can store character data in the u ser-defined page (character code table: page 255) so that you
can also print characters not resident in the printer.
Maintenance Counter
With this function, printer information, such as the number of lines printed, the number of
autocuts, and printer operation time after the printer starts working, is automatically stored in
NV memory. You can read the information with the Status API of the APD, OPOS ADK, or ESC/
POS commands to u
se it for periodical checks or part replacement.
For the character code table, see "Character Code Tables" on page 96.
You can also check the head running length and number of times of autocutting with the
self-test (see "Self-test Mode" on page 72.) and the TM-T20II Utility.
To Next Page
Loading...
