32
Installing the Printer
You can install the printer horizontally on a flat surface (with the paper exit on top) or vertically
(with the paper exit at the front). Also, you can hang it on a wall using the included accessories.
Take measures to prevent the printer from moving by vibration during paper cutting and
when using a drawer. Affixing tape (Model: DF-10) is provided as an option.
Do not place the printer in dusty locations.
Do not knock or strike the printer. This may cause defective print.
Do not catch cables or foreign matter under the printer.
Horizontal installation
Vertical installation
Hanging on a wall
To Next Page
Loading...
