Chapter 4 Handling
81
4
Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
1
Open the roll paper cover by using the cover open lever.
2
Remove the used roll paper core, if it is installed.
CAUTION
Do not open the roll paper cover during printing or autocutting.
The printer may be damaged.
Do not touch the manual cutter with your hands when installing or replacing the
roll paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
Use roll paper that meets the printer specification. For details about paper specification,
see "Paper Specifications" on page 25.
Paper must not be pasted to the roll paper core.
To Next Page
Loading...
