Epson TM-T20II

Appendix
93
Setting Conditions for Software Setting Mode
For information about setting the Software Setting Mode, see "Software Setting Mode" on page
78.
Setting Items
Selection of software settings
 The initial setting is underlined.
1st page 2nd page 3rd page
1: Print Current Settings -
2: Print Density 1: Monochrome 85%, 90%, 95%, 100%
, 105%, 110%, 115%
3: Printing Speed Level 1(Slow) to Level 1
3(Fast)
4: Serial
Interface
Settings
1: Baud Rate 2400bps, 4800bps, 9600bps, 19200bps,
3
8400bps, 57600bps, 115200bps
2: Parity None
, Odd, Even
3: Handshaking DTR/DSR
, XON/XOFF
4: Data Bits 7 bits, 8 bits
5: Data Receive Error Print "?", Ignored
5: Auto Paper Feed&Cut at cover close Enable
, Disable
6: Paper Width 80mm
, 58mm
8: Default
Character
1: Code Page 1: Western
Europe,
Southern Europe
Page0:PC43
7(USA,Standard Europe),
Page3:PC860(Portuguese),
Page11:PC851(Greek),
Page14:PC737(Greek),
Page15:ISO8859-7(Greek),
Page16:WPC1252, Page18:PC852(Latin2),
Page19:PC858, Page34:PC855(Cyrillic),
Page38:PC869(Greek),
Page39:ISO8859-2(Latin2),
Page40:ISO8859-15(Latin9),
Page45:WPC1250, Page47:WPC1253
2: Eastern
Europe,
Northern Europe
Page5:PC865(Nordic),
Page17:PC866(Cyrillic#2),
Page33:WPC775,
Page35:PC861(Icelandic),
Page42:PC1118(Lithuanian),
Page43:PC1119(Lithuanian),
Page44:PC1125(Ukrainian),
Page46:WPC1251, Page51:WPC1257
3: USA Canada Page0:PC437(USA,Standard Europe),
Page4:PC863(Canadian-French)