Epson TM-T88 - Page 46

Rev. A Command Descriptions 1-37
TM-T88/T88P (TM-T85/T85P) Information Manual
Error status (n=3)
* For TM-T88/T88P, bit 6 is on when a head temperature error occurs and the cover is open during
printing. For TM-T85/T85P, bit 6 is on when a head temperature error occurs.
Paper roll sensor status (n=4)
* For TM-T88/T88P, when the cover is open, paper detection may be incorrect.
6
Off 00 0 No error.
On 40 64 Error occurred.
7 Off 00 0 Not used. Fixed to Off.
Bit Off/On Hex Decimal Status
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 — — — Undefined.
3
Off 00 0 No auto-cutter error.
On 08 8 Auto-cutter error occurred.
4 On 10 16 Not used. Fixed to On.
5
Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurred.
*6
Off 00 0 No auto-recoverable error.
On 40 64 Auto-recoverable error occurred.
7 Off 00 0 Not used. Fixed to Off.
Bit Off/On Hex Decimal Status
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2, 3
Off 00 0 Paper roll near-end sensor: paper adequate.
On 0C 12 Paper roll near-end sensor: paper near end.
4 On 10 16 Not used. Fixed to On.
*5, 6
Off 00 0 Paper roll end sensor: paper present.
On 60 96 Paper roll end sensor: paper not present.
7 Off 00 0 Not used. Fixed to Off.
Bit Off/On Hex Decimal Status