Epson TM-T88

3-6
Reference Table
Command Name Function
Supported Command
TM-
T85
TM-
T88/
T88M
TM-
L60II
TM-300/300M TM-U200 TM-
U375/
U375M
TM-
H5000/
H5000M
TM-
U925
TM-
U950/
U950M
TM-
295
TM-
215S
ABCDB D
HT Horizontal tab Moves the printing
position to the next
horizontal tab position.
●●●●●●●●● ● ● ●●
LF Print and line feed Prints the data in the
print buffer and feeds
one line based on the
current line spacing.
●●●●●●●●● ● ● ● ● ●●
FF 1. Print and eject
cut sheet (in
standard
mode)
Prints the data in the
print buffer and ejects
the cut sheet.
●●●●●
2. Print and return
to standard
mode (in page
mode)
Prints the data in the
print buffer and returns
to standard mode.
●●● ● ● ●
3. Print and feed
label to print
starting position
(on label)
Prints the data in the
print buffer and feeds
the next label to the
print starting position.
●
CR Print and carriage
return
When auto line feed is
enabled, this
command functions in
the same way as LF.
When auto line feed is
disabled, this
command prints the
data in the print buffer
and does not feed the
paper, or is ignored.
OOO
●●●●● ●
●●●●
O●
CAN Cancel print data
in page mode
Deletes all the print
data in the current
printing area in page
mode.
●●● ● ● ●
The commands supported by each printer are marked by a ● or a O. The functions of the commands marked by a O may differ, depending on the printer model.