Epson TM-T88 Information Manual

Rev. A Command Descriptions 1-53
TM-T88/T88P (TM-T85/T85P) Information Manual
With a parallel interface model, this command is not executed in the following status because the
printer is busy and unable to receive data from the host computer.
❏ Receive buffer is full when DIP switch 2-1 is set to on.
❏ Printer is off-line, an error occurs, or receive buffer is full when the DIP switch 2-1 is set to
off.
n Request
1 Restarts printing from the beginning of the line where an
error occurred, after recovering from the error.
2 Recovers from an error after clearing the receive and print
buffers.
Program Example
PRINT #1, CHR$(&H10);CHR$(&H5);CHR$(2);

Epson TM-T88 Specifications

General

Print Method	Thermal Line Printing
Resolution	180 dpi
Auto Cutter	Yes
Printer Type	Receipt printer
Interfaces	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Power Consumption	1.8W (Standby)
Paper Width	80 mm or 58 mm (with paper width guide)
Power Supply	Internal (depending on the model) or External