Epson TM-T88 Information Manual

ii Rev. A
Features
The TM-T88 and TM-T88P (TM-T85/T85P) can be used as one-station printers for ECR and POS,
as ticket-issuing devices, and as output devices for weighing and measuring. The printers have
the following features:
❏ Light weight and ultra-compact size.
❏ High speed printing: 16.5 lines per second. (12 lines per second for TM85/T85P).
❏ Low-noise thermal printing.
❏ Easy maintenance for tasks such as head cleaning.
❏ New paper handling enables easy paper roll setting.
❏ Command protocol based on the ESC/POS™ standard.
❏ Various layouts possible using page mode.
❏ Font selection (12 × 24 or 9 × 24) possible using a command.
❏ Character extension (up to 64 times the standard size) and character smoothing.
❏ Four different print densities selectable via DIP switch settings.
❏ Water-resistant operation panel.
❏ Bar code printing possible both in the vertical direction (fence bar code) and horizontal
direction (ladder bar code in page mode) using a command.
❏ Repeated operation and copy printing possible using macro definitions.
❏ Control capability for two drawers via the built-in interface.
❏ The auto-cutter is equipped.
Option
❏ EPSON power supply unit, PS-170.

Epson TM-T88 Specifications

General

Print Method	Thermal Line Printing
Resolution	180 dpi
Auto Cutter	Yes
Printer Type	Receipt printer
Interfaces	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Power Consumption	1.8W (Standby)
Paper Width	80 mm or 58 mm (with paper width guide)
Power Supply	Internal (depending on the model) or External