Epson TM-T88

3-11
TM–T88/T88P (TM–T85/T85P) Information Manual
ESC f Set cut sheet wait
time
Sets the time that the
printer waits for cut
sheet to be inserted and
the time from insertion
of the sheet until printing
starts.
●●
●●●●●
ESC i Partial cut (one
point left uncut)
Executes a partial cut of
the paper with one
point left uncut.
●
●● ● ●
ESC m Partial cut (three
points left uncut)
Executes a partial cut of
the paper with three
points left uncut.
●● ● ●
ESC o Stamp Executes stamp printing.
●●
ESC p Generate pulse Outputs a specified
pulse to a specified
connector pin.
●●●●●●●●● ● ● ● ● ●●
ESC q Paper release Releases the paper. ●● ●
ESC r Select print color Selects the print color.
●●●OO ●
ESC t Select character
code table
Selects a page from
the character code
table.
●●●●
●
●●
●
●● ● ●●●●
ESC u Transmit
peripheral device
status
Transmits the status of a
specified connector
pin.
●●
OOOO
●●●●●
ESC v Transmit paper
sensor status
Transmits the status of a
paper sensor.
●
●
OOOO
●
●
●●●
ESC z Turn parallel
printing mode on/
off for receipt
and journal paper
Turns parallel printing
mode on or off for
receipt and journal
paper.
●
Command Name Function
Supported Command
TM-
T85
TM-
T88/
T88M
TM-
L60II
TM-300/300M TM-U200 TM-
U375/
U375M
TM-
H5000/
H5000M
TM-
U925
TM-
U950/
U950M
TM-
295
TM-
215S
ABCDB D
The commands supported by each printer are marked by a
● or a O. The functions of the commands marked by a O may differ, depending on the printer model.