24
Registration of TM Printer
Register the device ID and IP address of the controlled TM printer to TM-i. Use EPSON TMNet WebConfig to
register the device ID.
TM-i firmware ver.3.x or earlier
Use the following procedure for registration.
1
Start the setup computer.
2
Connect all TM printers to the network and power on.
3
Start the Web browser on the setup computer and enter as follows:
http://[IP address of the TM-i]/PrinterConfigurationPage/
For details about the IP address settings for TM-i, see IP Address Settings (p.23).
4
EPSON TMNet WebConfig starts.
Select as [Device].
• TM-i printer cannot be deleted from the device.
• The device ID of TM-i printer can be changed.
To Next Page
Loading...
