Epson TM-T88V-DT

34
Service startup settings
To make service startup settings, use EPSON TMNet WebConfig and the following procedure.
1
Start EPSON TMNet WebConfig from the shortcut on the desktop.
EPSON TMNet WebConfig starts.
2
Select as [Settings]-[Web service settings]-[Startup settings].
The "Startup settings" screen appears.
3
Set the following according to the system you are using, and then click [Apply].
If you are making settings from an external device, set the TM-DT IP address in the
address for the Web browser. The default IP address for TM-DT is 192.168.192.168.
http://[IP address of TM-DT]/webconfig/
Item Description Setting
Device control
Sets whether to use TM-DT to control peripheral
POS devices.
On (Default)
Automatic update of
web content
Sets whether to automatically update web
content.
Off
Server direct print Sets whether to use server direct print. On
Status notification
Sets whether to send status notification when using
the server direct print function.
On/Off