Epson TM-T88V-DT

27
Chapter 2 Sample Program
2
Server Direct Print Settings
Configure the Server Direct Print settings using EPSON TMNet WebConfig.
TM-i firmware ver.3.x or earlier
Use the following procedure for registration.
1
Start the setup computer.
2
Connect the TM-i to the network and turn the power ON.
3
Start the Web browser on the setup computer and enter as follows:
http://[IP address of the TM-i]/PrinterConfigurationPage/
For details about the IP address settings for TM-i, see IP Address Settings (p.23).
4
EPSON TMNet WebConfig starts.
Select as [Direct Print].


