26
TM-i firmware ver.4.0 or later
Use the following procedure for registration.
1
Start the setup computer.
2
Connect all TM printers to the network and power on.
3
Start the Web browser on the setup computer and enter as follows:
http://[IP address of the TM-i]/PrinterConfigurationPage/
For details about the IP address settings for TM-i, see IP Address Settings (p.23).
4
EPSON TMNet WebConfig starts. Select [Web Service Settings] - [Printer].
5
The “Printer” screen appears.
Configure the following items, click [Add].
6
The information of the registered device is displayed in "Registered printers".
Click [Test Print] to check if the registered printer operates properly.
Item Description
Device ID Set the ID for the controlled printer. (Any character string)
Model Select the model for the controlled printer.
IP Address Set the printer IP address for each device ID. (p. 23)
Retry Interval (ms)
Set the timeout retry interval.
Specify "100".
To Next Page
Loading...
