54
Overview of Status Notification Sample Program
This program displays the status of the connected printer on the screen.
For the configuration such as Hardware Configuration (p. 18) and Environment Settings (p. 20), the same
configuration is used as with the Server Direct Print. (p. 18)
File Configuration
TM Intelligent Printer Settings
TM-i Settings
TM-i firmware ver.3.x or earlier
Configure the Status Notification settings using EPSON TMNet WebConfig.
Use the following procedure for registration.
1
Start the setup computer.
2
Connect the printer to the network and turn the power ON.
3
Start the Web browser on the setup computer and enter the IP address of TM-i set
in "IP Address Settings" (p.23).
File Name Description
Test_status.php Obtains and displays the result in response to a request from the printer.
resultPrint.log The printing result is retained in this file. The file is created after printing.
demo indexStatus.html Displays the printer status.
The registration screen will vary according to the model of TM Intelligent printer.
• "TM-i Settings" (p.54)
• "TM-DT Settings" (p.57)
To Next Page
Loading...
Need help?
General