21
Chapter 2 Sample Program
2
Printing in page mode
Execute the printing in page mode according to the following procedure:
1
Enter a string to print for [Print Characters].
2
Set the print area using [Print Area].
3
Tap [Print] to print.
Paper cutting
Execute the paper cutting according to the following procedure:
1
Set whether to cut after feeding paper using [Type].
2
Tap [Print] and execute cutting operation.
Setting Description
X Set the origin of horizontal axis.
Y Set the origin of vertical axis.
Width Set the width for the print area.
Height Set the height for the print area.
To Next Page
Loading...
