4. Enter your wireless password (or network name and then password).
• Press the numeric keypad buttons repeatedly to scroll through characters (uppercase, lowercase,
or numbers).
• To select a symbol, press 1 repeatedly.
• To move the cursor or enter a space, press the right arrow button.
• To delete characters, press the left arrow button.
• When you finish entering characters, press the OK button.
5. Press 2 if you want to print a network status report, or 1 if not.
The WiFi light should now be on, but not flashing.
Note: If the WiFi light is off, you may have selected the wrong network name or entered the
password incorrectly. Repeat these steps to try again.
Related topics
Solving Network Problems
31
To Next Page
Loading...
