Epson WF-2960 - Page 24

24
You see a screen like this:
3. Select Daylight Saving Time.
4. Select the setting that applies to your area:
• Winter: it is winter or your region does not use Daylight Saving Time (DST)
• Summer: it is spring or summer and your region uses Daylight Saving Time (DST)
Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the
season. When you change from Winter to Summer, your product automatically sets its clock ahead
one hour. When you change from Summer to Winter, it sets its clock back one hour.
5. Select Date/Time.
6. Select the date format you want to use.
7. Use the displayed keypad to enter the current date, then select OK.
8. Select the time format you want to use, then select OK.
9. Use the displayed keypad to enter the current time.
10. Select Time Difference.
11. Use the – or + icons to enter the time difference between your time zone and UTC (Coordinated
Universal Time), then select OK.
Parent topic: Using the Control Panel