Epson WF-2960 - Adjusting Control Panel Sounds; Turning off the Operation Time out Setting; Preventing PC Connection Via USB

25
Adjusting Control Panel Sounds
You can adjust the sound level heard when you press buttons on the control panel.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Basic Settings > Sound.
3. Select Mute, Normal Mode or Quiet Mode.
Note: Select the icon on the home screen to switch between Normal Mode and Quiet
Mode.
4. If you selected Normal Mode or Quiet Mode, do the following:
• Select Button Press.
• Select the – or + icon to decrease or increase the sound.
• Select OK to exit.
Parent topic: Using the Control Panel
Turning Off the Operation Time Out Setting
The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes
of inactivity. This feature is enabled by default, but you can turn it off.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Basic Settings.
3. Scroll down and set Operation Time Out to Off.
Parent topic: Using the Control Panel
Preventing PC Connection via USB
You can disable access from a USB-connected computer. This restricts non-network access to the
product and protects the security of confidential scanned documents.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Printer Settings.
3. Scroll down and select PC Connection via USB.
4. Select Disable.