193
• Select from the sent fax history: Select Recent to display the sent fax history. Select a recipient
from the list.
Note: To delete entered recipients, select the Enter Recipient field, select the recipient you want to
delete, and select Remove.
5. If you need to change any fax settings, select Fax Settings and select your settings.
6. If you want to preview your fax in black-and-white on the LCD, press the icon. (If the preview
looks incorrect, select Retry, reposition the document or change the fax settings, and repeat this
step.) You cannot send the fax in color after previewing it.
Note: If you do not touch the preview screen for 20 seconds, your product sends the fax
automatically. You cannot preview images when the Direct Send setting is turned on.
7. If you want to save your fax settings for later use, press the preset button and add a new entry.
8. Press the Send icon.
Note: To cancel faxing, select Cancel.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Note: Your product does not save sent color faxes to its memory. If the Save Failure Data option is
enabled, faxes that failed to be sent are stored to the product's memory and you can resend them from
the Status Menu screen.
Parent topic: Sending Faxes from the Product Control Panel
Related references
Fax Sending Options
Related tasks
Selecting the Line Type
Using Presets
Related topics
Placing Originals on the Product
Setting Up Contacts Using the Product Control Panel
To Next Page
Loading...
Need help?
General
