EasyManua.ls Logo

Epson WF-4720 series - Network Interface Specifications

Epson WF-4720 series
337 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
323
Network Interface Specifications
Wi-Fi
Standards IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE
802.11 b/g/n, depending on purchase location
Security WPA-PSK (AES); complies with WPA2 with support for WPA/WPA2
Personal
WEP (64/128 bit)
Frequency range 2.4 GHz
Maximum Radio-Frequency
Power Transmitted
19.8 dBm (EIRP)
Coordination modes Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Ethernet
Standard IEEE802.3i/u (10BASE-T); use a category 5e or higher STP
(Shielded twisted pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
Security Protocol
SSL/TLS
HTTPS Server/Client, IPPS
SMTPS (STARTTLS, SSL/TLS)
Parent topic: Technical Specifications

Table of Contents

Other manuals for Epson WF-4720 series

Related product manuals