A
Home screen displayed when the application is started.
B
Displays information on how to setup the printer and a FAQ.
C
Displays the screen where you can select the printer and make printer settings. Once you have selected the
printer, you do not need to select it again from the next time.
D
Displays the scanning screen.
E
Displays the screen where you can make scan settings such as resolution.
F
Displays scanned images.
G
Starts scanning.
H
Displays the screen where you can save scanned data to a smart device or Cloud services.
I
Displays the screen where you can send scanned data by email.
J
Displays the screen where you can print scanned data.
Scanning by Touching Smart Devices to the N-Mark
You can simply connect and scan by touching your smart device to the printer's N-Mark.
Make sure that you prepare the following before using this feature.
❏ Enable the NFC function on your smart device.
Only Android 4.0 or later supports NFC. (Near Field Communication)
e location and NFC functions vary depending on the smart device. See the documentation provided with
your smart device for details.
❏ Installed Epson iPrint on your smart device.
Touch your smart device to the printer's N-Mark to install it.
❏ Enable the Wi-Fi Direct on your printer.
1. Place the originals in the printer.
2.
Touch your smart device to the printer's N-Mark.
Note:
e printer may not be able to communicate with the smart device when there are obstacles such as metal between the
printer's N-Mark and the smart device.
Epson iPrint starts.
User's Guide
Scanning
141
To Next Page
Loading...
Need help?
General
Weight and Dimensions
