Epson WF-7710 series User Manual

Code Problem Solution
001 The product was turned o by a power failure. -
109 The received fax was already deleted. -
110 The job was printed on one side only because the
paper loaded does not support double sided
printing.
If you want to perform 2-sided printing, load paper
that supports 2-sided printing.
201 The memory is full.
❏ Print received faxes from Job Status in Job/
Status .
❏ Delete received faxes saved in the inbox from Job
Status in Job/Status.
❏ If you are sending a monochrome fax to a single
destination, you can send it by using Direct Send.
❏ Divide your originals in two or more to send them
in several batches.
202 The line was disconnected by the recipient machine. Wait for a while and then try again.
203 The product cannot detect the dial tone. ❏ Make sure that the phone cable is connected
correctly and the phone line is working.
❏ When the printer is connected to the PBX or the
terminal adapter, change the Line Type setting to
PBX.
❏ Select Settings > General Settings > Fax
Settings > Basic Settings > Dial Tone
Detection, and then disable the dial tone setting.
204 The recipient machine is busy. Wait for a while and then try again.
205 The recipient machine does not answer. Wait for a while and then try again.
206 The phone cable is incorrectly connected to the LINE
and EXT. port of the product.
Check the connection of the LINE port and the EXT.
port of the printer.
207 The product is not connected to the phone line. Connect the phone cable to the phone line.
208 The fax could not be sent to some of the specied
recipients.
Print a Fax Log or Last Transmission report for
previous faxes from Fax Report in the Fax mode to
check the failed destination. When the Save Failure
Data setting is enabled, you can resend a fax from
Job Status in Job/Status.
301 There is not enough storage space available to save
the data in the memory device.
❏ Increase the storage space in the memory device.
❏ Reduce the number of documents.
❏ Lower the scanning resolution or increase the
compression ratio to reduce the size of the
scanned image.
302 The memory device is write-protected. Disable write protection on the memory device.
303 No folder has been created to save the scanned
image.
Insert another memory device.
304 The memory device has been removed. Reinsert the memory device.
User's Guide
Solving Problems
229

Epson WF-7710 series Specifications

General

Type	all in one
Color	black
Touch Screen	yes
Display Size	4.3 inches
Tray Capacity	250
Output Tray Capacity	125
Automatic Document Feeder Capacity	35 sheets
Paper Size	3.5" x 5", 4" x 6", 5" x 7", 8" x 10", 8.5" x 11", 8.5" x 14", 11" x 17", 13" x 19", a4, a6, half letter, executive, user-definable (up to 47.2" length)
Paper Handling	up to 250 sheets
Printing Method	color
Color Print Speed	10 pages per minute
Mono Print Speed	18 pages per minute
Print Resolution Mono	up to 4800 x 2400
Print Resolution Color	up to 4800 x 1200
Media Types	plain paper, epson bright white paper, epson presentation paper matte, epson premium presentation paper matte
Two-Sided Printing	yes
Maximum Number of Pages Per Month	up to 20, 000
Photo Printing	yes
Scanner Type	flatbed
Scan Resolution	up to 9600
Duplex Scan	yes
Max Copies	999
Copier Resolution Mono	up to 600 x 600
Copier Resolution Color	up to 600 x 600
Fax Function	yes
Cartridges	252 durabrite ultra standard-capacity, 252xl durabrite ultra high-capacity, 254xl durabrite ultra extra high-capacity
Number Of Cartridges	4
Number of Ink Tanks	4
Internal Memory	yes
Memory Card	yes
Network	wired, wireless
Connectivity	apple airprint, epson iprint, google cloud print
OS Compatibility	windows® 10; 8/8.1; 7; vista®; server® 2003 (sp2) - server 2016, mac® os x® 10.6.8 - macos® 10.12.x
Mobile Devices Connection	yes

Weight and Dimensions

Height	13.4 inches
Width	22.3 inches
Net Weight	40.8 pounds