Epson WorkForce Pro WF-C5790 User Manual

321
Parent topic: Adjusting Print Quality
Related concepts
Print Head Cleaning
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the home button, if necessary.
4. Select Settings > Maintenance > Print Head Alignment.
5. Select one of the following options:
• Ruled Line Alignment if your printout is blurry.
• Horizontal Alignment if your printout contains horizontal banding.
6. Follow the on-screen instructions to print an alignment sheet.
Note: Do not cancel printing while you are printing head alignment patterns.
7. Check the printed patterns on the alignment sheet and select the following on the LCD screen,
depending on the alignment pattern you printed:
• Ruled Line Alignment: Select the number representing the pattern with the least amount of
separation or overlap.

Epson WorkForce Pro WF-C5790 Specifications

General

Print Resolution	4800 x 1200 dpi
Automatic Duplex Printing	Yes
Output Paper Capacity	150 sheets
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scan Resolution	1200 x 2400 dpi
ADF Capacity	50 sheets
Fax Speed	33.6 Kbps
Display	4.3" color touchscreen
Print Technology	PrecisionCore
Print Speed	24 ppm (black/color)
Input Paper Capacity	250 sheets
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Scanner Type	Color flatbed and ADF
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal, Executive
Ink Cartridges	Black, Cyan, Magenta, Yellow